钢珠马莲DIY制作PVC热收缩

非常经济适用的制作

我的汉巴仁在打印约800奥本的印象后，相当于一个PVC收缩包装封面-没有明显的磨损。

不时它已经很难获得优质takenokawa（竹壳）用于恢复我的巴伦斯。 For some time I've wondered about alternativematerials for baren covers, especially about using heat shrinktubing.一段时间以来我一直想知道的巴人盖的替代材料，特别是有关使用热缩管。 I bought some six inch wide clear layflat PVCheat shrink tubing (12 inch circumference), cut a length about 21/2 times the diameter of my baren, trimmed the ends to makethinner handles and… It seems to have worked pretty well,actually!我买了一些6英寸宽的清晰吹塑，PVC热缩套管（12英寸周长），切成长度为巴朗我大约21/2倍的直径，修剪的两端，使更薄的把手和...它似乎工作得很好，居然！ Covering a baren with takenokawa the traditionalway requires a lot of practice and somedexterity.涵盖了巴人与takenokawa的传统方式需要大量的练习和一些灵巧。Coveringa baren with PVC heat shrink tubing seems to require very littleskill or dexterity — as long as you don't over heat the material(or the baren!) it seems prettyfool-proof.覆盖与PVC热缩套管巴伦一人似乎都需要很少的技能或灵巧 -（！或巴人），只要你不要过度加热材料似乎很傻瓜的证明。

Theparticular PVC heat shrink tubing I acquired seems a bit too thinor light weight (5 mil) for abaren.我获得了特定的PVC热缩套管的巴人似乎有点太细或重量轻（5密耳）。 Even so, less flexible than takenokawa but seemshardier.即便如此，也比takenokawa不太灵活，但似乎强壮。 Hardiness is good because the shrink-wrappedbaren is completely encased front and back so it's impossible torotate the baren during printing so all wear occurs where the highpoints of the coil press the shrink wrap against the paper andblock.抗寒性还是不错的，因为收缩包装巴人完全包裹正面和背面所以不可能在打印过程中旋转巴人，因此所有的磨损发生在那里的高点线圈记者对纸和块的收缩包装。

Whenlubricated with camellia oil, the PVC covering glides over thepaper with about the same 'feel' as takenokawa, though because it'scompletely non-absorbent and glossy smooth, it seems to run dry oflubricant faster than takenokawa and then frictionincreases…当与山茶花油，聚氯乙烯覆盖滑过具有大致相同的'感觉'作为takenokawa纸，润滑，但因为它是完全非吸收性和光泽光滑，似乎跑干膜润滑剂比takenokawa更快，然后摩擦增大...

I thinkI'll eventually be able to find a shrink tubing with more idealcharacteristics — in the meantime, this stuff seems to work betterthan I'd expected.我想我会最终能找到一个热缩套管具有较为理想的特性 -在此期间，这东西似乎更好地工作比我的预期。