Figure Zetman S.I.C.软陶粘土教程 动手自己设计的无比乐趣
其实在漫画中出现不少有趣或帅气的人物, 可惜市面不可能完全出齐figure, 这次做的是”Zetman“, 他是桂正和先生继”Wing Man”后设计的超人人物AN S.I.C. FIGURE DIY很高兴,因我想做的人物zetman终于完成了, 花了不少心机把软陶的纹理特性加上figure上, 红黑色的zetman看起来更有性格, 稍后会把製作教程贴出来,有兴趣的朋友们请耐心等待啊, 谢谢常常来clayus网的朋友们 : D
1. 头部制作由头的正半面开始, 用黑色把面如图基本造型.
2.用灰色做面部, 用尖头工具把嘴定位,划线工具把口压出.
3.把Zetman左右(应是耳朵吧..)造型.
4.做额头的红色及黄色眼珠.
5.用红色把眼上方的特徵做出来, 并把角做好, 这时先第一次加热定型.
6.如图用黑色把头后方做出来,要把头做成立体, 并可站起来, 这时先第二次加热定型.
7.把角用AB胶贴上去,加上光油.
8.用炳烯上阴影! 头部完成.
1.制作鞋子, 身体是从下而上製作啊.
2.把鞋左加用灰色加上拉鍊, 并在上方加上铁支,这时先第一次加热定型.
3.把脚及腰制作出来
4.下身造型,并加上腰带,这时第二次加热定型.
5.上身製作,这时先第三次加热定型.
6.製作手臂及手掌, 手臂先接好,手掌分开烤,并加上胸前的红色面,及底盘.
这时第三次加热定型.
7.把手用AB胶接上, 加光油及用炳烯上阴影! 身体完成.
最后用AB胶把头部接上! ZETMAN完成!
Zetman S.I.C. 自製 Figure 模型 侧面图
Zetman S.I.C. 自製 Figure 模型 正面图
Zetman S.I.C. 自製 Figure 模型 前额
Zetman S.I.C. 自製 Figure 模型 背面图
Zetman S.I.C. 自製 Figure 模型软陶粘土教程全身图
FromWikipedia, the free encyclopedia
About Zetman
Zetman (ゼットマン, Zettoman) is amanga series byMasakazu Katsura. The series started as a one-shot in a series of four published in theShueisha Weekly Shōnen Jumpmagazine between 1989 and 1994, and collected into atankōbon released in 1995. A more mature and full-fledged series started in theseinenYoung Jump magazine in 2002. The initial volumes were positively reviewed while the later ones have been criticized for losing some of its initial originality.
Plot
The story starts off with a face-off between two rival heroes, ZET and Alphasz, and then traces their origins – Jin Kanzaki, a young man with the ability to transform into a superhuman being known as ZET, and Kouga Amagi, a young man with a strong sense of justice who uses technology to fight as Alphasz.
The fates of these two men and those around them intertwine as they fight to protect mankind and destroy monstrous abominations known as Players, who ironically are the creations of the Amagi Corporation, the company founded by Kouga’s grandfather, Mitsugai Amagi.
Main characters
Jin Kanzaki (神崎 人, Kanzaki Jin, or ジン Jin)/ZET: The main protagonist. A mysterious young man bearing a circular lump on the back of his left hand, Jin was a result of the Z.E.T. Project by the Amagi Corporation to create the perfect being to fight and destroy the escaped Players. He was however released by Gorou Kanzaki, who wanted nothing more for Jin than to grow up as a normal human. After the death of his ‘grandfather’, Kanzaki, Jin stayed with Akemi Kawakami until he witnessed her ‘death’ under the hands of the Amagi Corp., in an effort to retrieve their creation. He has been living in a slum alone ever since, monitored closely by his creators, especially Mitsugai.
Figure Zetman S.I.C.软陶粘土教程由小鬼独家提供,自香港作者小鬼的个人网站,本站有的壮为大家翻译整理,网站还有不少精美的粘土和软陶手工教程,喜欢的肉丝们可以去看看哦:
本文链接在这里:
-
超轻粘土 安妮 哥特萝莉制作手工粘土陶艺教程
这次没有刷丙烯呢,只有袜子用了丙烯主要材料:超轻粘土所需工具:丙烯颜料0.6的珠子两颗做眼睛制作步骤:第1步:画面装挑眼睛第2步:安上眼睛和睫毛第3步:开始做头发第4步:头饰第5步:第6步:上身第7步:第8步:加花边第9步:下身第10步:裙子和手臂第11步:拼装第12步:寻背包和小熊第13步...
-
软陶多肉橙梦露手工粘土陶艺教程
软陶多肉主要材料:软陶所需工具:刀片丸棒色粉刷制作步骤:第1步:准备材料:软陶半透白,橙色,色粉,色粉刷,丸棒,刻刀第2步:调好多肉颜色切断待用第3步:取其中一个搓球第4步:然后慢慢把球形搓成水滴状第5步:两只手从叶肉两边往下压,把叶肉两边压薄第6步:依次做出很多叶片待用第7步:...
-
微小璀璨光泽!考验眼力与功力的玻璃昆虫雕塑
下次要打蚊子前,千万别闭着眼睛乱打,不然你可能就错过了艺术家角田夕贵(YukiTsunoda)的作品喔!角田夕贵透过玻璃,以真实尺寸重现各种昆虫和植物,从触角到身体的花纹,甚至是近乎透明的翅膀,都维妙维肖。26岁的角田夕贵从2012年开始了她的玻璃艺术创作,她起初试着仿制一...
-
手工制作的精美陶瓷娃娃
俄罗斯女艺术家MarinaBychkova手工制作的陶瓷娃娃,每一只售价都在4万美元甚至更高。但这些陶瓷娃娃是如此精美,就算最不喜欢娃娃的人,也难免要看上几眼,如果不是裸露出来的活动关节,看起来就像活的一样。也许因此才叫做施了魔法的娃娃吧。...
相关文章
- 【蜡染的视觉世界】Francisca Núñez Reveco的蜡染艺术(智利 圣地亚哥)
- Children's Afternoon At Wargemont by Pierre-Auguste Renoir
- 室内设计师Jessica Helgerson作品集:White Brick Mediterranean
- 美国知名室内设计师Thom Filicia作品:Greystone Estate
- 西班牙建筑设计公司Abaton Architects作品集:Estate in Extremadura
- 西雅图设计及工程公司JAS Design Build作品:Contemporary Grange
- Spike Isn't Much Of A Swimmer by Anne Gifford
- 室内设计师Jessica Helgerson作品集:Turn of the century Modern
- 美国设计师Stuart Fingerhut设计的Kinema吊灯图片
- Children's Afternoon At Wargemont by Pierre Auguste Renoir